Products

Catalog Shop

406 products « Page 1 of 2 »
Filter
Sort By
Categories
Price
$ $
Car Frame Parts
Victory Door Operators Parts
Residential Electrical
Common Parts for Jacks
Hydraulically Synchronized Telescopic Jack Parts

Gland seals – for 70/100/140 3 stage HST jack (ST 70 3S)

Gland seals – for 85/120/140 3 stage HST jack (ST 85 3S)

Internal Piston assembly – for 50/70 mm 2 stage jack Selection and Ordering Internal Synchronization Parts for OLS 2 Stage Telescopic Jacks For twin jack systems we recommend replacing the internal synchronization parts on both jacks at the same time. We also recommend that you order and replace the gland seal kits for the appropriate model OLS 2 stage telescopic jacks.  The gland seal kits can also be found in the HST Telescopic Jacks section. Shipping crate:  OLS# 637698

Internal Piston assembly – for 63/85 mm 2 stage jack

Jack Type: OLS HST 2-Stage

Jack Model: ST 63 2S

Piston Diameter: 63/85 mm (2.48″ – 3.35″)

Selection and Ordering Internal Synchonization Parts for OLS 2-Stage Telescopic Jacks

For twin jack systems we recommend always replacing the internal synchronization parts on both jacks at the same time. We recommend ordering and replacing the gland seal kits for the appropriate model of OLS 2-stage telescopic jacks. The gland seal kits can be found in the HST Telescopic Jacks Spare Parts section.

*

Internal piston assembly – for 70/100 mm 2 stage jack Selection and Ordering Internal Synchronization Parts for OLS 2-Stage Telescopic Jacks For twin jack systems we recommend always replacing the internal synchronization parts on both jacks at the same time. We also recommend that you order and replace the gland seal kits for the appropriate model of OLS 2-stage telescopic jacks.  The gland seal kits can be found in the HST Telescopic Jacks spare parts section.

Internal piston assembly – for 70/100 mm 2 stage jack

Selection and Ordering Internal Synchronization Parts for OLS 2-Stage Telescopic Jacks For twin jack systems we recommend replacing the internal synchronization parts on both jacks at the same time. We also recommend that you order and replace the gland seal kits for the appropriate model of OLS 2-stage telescopic jacks.  The gland seal kits can be found in the HST Telescopic Jacks spare parts section.

Seal kit – for 50/70 mm 2 stage HST jack (ST 50 2S)

Seal kit – for 63/85 mm 2 stage HST jack (ST 63 2S)

Seal kit – for 70/100 mm 2 stage HST jack (ST 70 2S)

Seal kit – for 85/120 mm 2 stage HST jack (ST 85 2S)

Mechanically Synchronized Telescopic Jack Parts
Guide Block – for Mechanically Syncronised Telescopic Jack
Seal kit – for 60/75 mm 2 stage Mechanically Jack (60-2Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 60-2Y Piston Diameters: 60/75 mm (2.36″/ 2.95″)
Seal kit – for 60/75/90 mm 3 stage MST Jack (60-3Y) – Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 60-3Y Piston Diameters: 60/ 75/ 90 mm (2.36″/ 2.95″/ 3.54″)
Jack type: OLS MST
Seal kit – for 60/80mm 2 stage OLS Jack (MT6080) Model: OLS MT6080 Piston Diameters: 60/ 80 mm (2.36″/ 3.35″)

Seal Kit – for 75/90 mm 2 Stage MST Jack (75-2Y)- Repacking Tool Kit 500101 Recommended

Model: 75-2Y

Piston Diameters: 75/ 90 mm

Seal kit – for 75/90/105 mm 3 stage MST Jack (75-3Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 75-3Y Piston Diameters: 75/ 90/ 105 mm (2.95″/ 3.54″/ 4.13″)
Seal kit – for 90/105/120 mm 3 stage MST Jack (90-3Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EC Model: 90-3Y Piston Diameters: 90/ 105/ 120 mm (3.54″/ 4.13″/ 4.72″)
Single Stage Jack Parts
O Ring, Joint, for 70/80mm 2 piece single stage jack
O-Ring, Joint, for 90mm 2 piece single stage jack, head O-ring for 80mm Jack
Seal kit for single stage 150mm jack
Hydraulic Power Unit (Drives) Parts
Capacitor, Motor starting ( 75 mf )
Capacitor, Motor starting ( 100 mf )
Coil, Valve ( 24 VDC ) Note: CSA Sticker 638099 Required
Coil, Valve ( 110 VAC ) Note: CSA Sticker 638095 Required
Coil, Valve ( 110 VAC/ 12 VDC) Note: CSA Sticker 638096 Required
Coil, Valve ( 220 VAC ) Note: CSA Sticker 638098 Required
Coil, Valve ( 220 VAC / 12 VDC ) Note: CSA Sticker 638097 Required
Connector, For Valve Coil and Low pressure switches

Pressure Gauge, Axial (for MRL power units)

Pressure Switch,Low, GMV – Bonded Washer 638275 Recomended
Pressure Switch, Low, Nason – Bonded Washer 638275 Recomended

Relay, Motor Overload, SM 110 (208-230V)

Relay, Motor Overload, SM 110 (460 V)
Washer,Bonded for low pressure switch
3010 Valve 0.75"

Seal Kit for .75 inch 3010 Valve

Valve, 3010, .75 inch, 25-32 LPM, 2 coil, indirect 2:1

3010 Valve 1.25"

Seal Kit (1.25″) for 1.25 inch 3010-EN Valves

Valve, 3010, 1.25 inch 16-32 LPM 2 coil indirect 2:1

Valve, 3010, 1.25 inch 16-32 LPM 3 coil indirect 2:1

Valve, Insert, VB/S, 16-45LPM for 1.25 inch 3010-EN Valves
Valve, Insert, VB/ S, 55-66LPM for 1.25 inch 3010-EN Valves
Valve, Insert, VB/ S, 90LPM for 1.25 inch 3010-EN Valves
Valve, Insert, VB/S, 120LPM for 1.25 inch 3010-EN Valves
Valve Model: GMV 3010 EN – 1.25″ Flow Range: 150 LPM (39.6 GPM)
Valve Model: GMV 3010 EN – 1.25″ Flow Range: N/ A
Valve, Insert, VB/ S, 216LPM for 1.25 inch 3010-EN Valves
Valve, Block, VMD, for 1.25 inch 3010-EN Valves
Valve, Block, VMD, with emergency lowering for 1.25 inch 3010-EN Valves
Valve, Block, VML, for 1.25 inch 3010-EN Valves
Valve, Block, VMP, for 1.25 inch 3010-EN Valves

Valve, Block, VMP/ S, for 1.25 inch 3010-EN Valves

Valve, Block, VP, for 1.25 inch 3010-EN Valves
Valve, Insert, VRF, 16-32LPM for 1.25 inch 3010-EN Valves
Valve, Insert, VRF, 90-150LPM for 1.25 inch 3010-EN Valves
Valve, Block, VRFP, for 1.25 inch 3010-EN Valves
Valve, Insert, VRP, 16-66LPM for 1.25 inch 3010-EN Valves
Valve, Insert, VRP, 90-150LPM for 1.25 inch 3010-EN Valves

Valve, Insert, VRP, 150-216LPM for 1.25 inch 3010-EN Valves

3010 Valve 1.50"
Seal Kit for 1.5 inch 3010-EN Valves  –  OLS# 638041

Valve 3010-EN 1.5 inch 252-360 LPM Direct 1:1

Valve, Insert, VB/ S, 180-216 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VB/ S, 252 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VB/ S, 300 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VB/ S, 360 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VB/ S, 432 LPM for 1.5 inch 3010-EN Valves

Valve, Block, VMD, for 1.5 inch 3010-EN Valves

Valve Model: GMV 3010 EN – 1.25″ Flow Range: N/ A

Valve, Block, VMD, with emergency lowering for 1.5 inch 3010-EN Valves

Valve, Block, VML, for 1.5 inch 3010-EN Valves

Valve, Block, VMP, for 1.5 inch 3010-EN Valves

Valve, Block, VMP/S, for 1.5 inch 3010-EN Valves

Valve, Insert, VRF, 360 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VRF, 432 LPM for 1.5 inch 3010-EN Valves

Valve, Block, VRFP, for 1.5 inch 3010-EN Valves
Valve, Insert, VRP, 180-216 LPM for 1.5 inch 3010-EN Valves
Valve, Insert, VRP, 250-360 LPM for 1.5 inch 3010-EN Valves

Valve, Insert, VRP, 432 LPM for 1.5 inch 3010-EN Valves

3010 Valve 2"

Seal Kit for 2 inch 3010-EN Valve (638150)

Valve, 3010-EN 2 inch 432-600 LPM indirect 1:1

Valve, Insert, VB/ S, 432LPM for 2 inch 3010_EN Valve (638150)

Valve, Insert, VB/ S, 516LPM for 2 inch 3010_EN Valve (638150)

Valve, Insert, VB/ S, 600LPM for 2 inch 3010_EN Valve (638150)

Valve, Block, VMD, for 2 inch 3010_EN Valve (638150)

Valve, Block, VML, for 2 inch 3010_EN Valve (638150)

Valve, Block, VMP/ S, for 2 inch 3010_EN Valve (638150)

Valve Model: GMV 3010 EN – 1.25″ Flow Range: N/ A

Valve, Insert, VRF, 432 to 600LPM for 2 inch 3010_EN Valve (638150)

Valve, Insert, VRP, 432LPM for 2 inch 3010_EN Valve (638150)

Valve, Insert, VRP, 516 to 600LPM for 2 inch 3010_EN Valve (638150)
Single Phase Submersable Motors
Three Phase Submersable Motors
Size: 36.8 kW (50 hp) Voltage: 230/ 460 V – 3 PH – 60 Hz Shaft Diameter: 32 mm (1.25?) RPM: 3300 Power Unit (Drive) Type: OLS/ GMV Tank 3, 4
Pumps – Hydraulic Oil

Pump – 15 LPM @3600 RPM 14mm Shaft (7.5LPM @ 1800 RPM) Stamped 12

Pump – 19 LPM @3600 RPM 14mm Shaft (9.5 LPM @ 1800 RPM) Stamped 16

Pump – 21 LPM @3600 RPM 14mm Shaft (10.5 LPM @ 1800 RPM) Stamped 17

Pump – 24 LPM @3600 RPM 14mm Shaft (12 LPM @ 1800 RPM) Stamped 20

Pump – 30 LPM @3600 RPM 14mm Shaft (15 LPM @ 1800 RPM) Stamped 25

Pump – 30 LPM @3600 RPM 19mm Shaft (15 LPM @ 1800 RPM) Stamped 25

Pump – 42 LPM @3600 RPM 19mm Shaft (21 LPM @ 1800 RPM) Stamped 35

Pump – 52 LPM @3600 RPM 19mm Shaft (26 LPM @ 1800 RPM) Stamped 43

Pump – 66 LPM @3600 RPM 19mm Shaft (33 LPM @ 1800 RPM) Stamped 55

Pump – 90 LPM @3600 RPM 19mm Shaft (45 LPM @ 1800 RPM) Stamped 75

Pump – 120 LPM @3600 RPM 19mm Shaft (60 LPM @ 1800 RPM) Stamped 100

Pump – 150 LPM @3600 RPM 19mm Shaft (75 LPM @ 1800 RPM) Stamped 125

Pump – 180 LPM @3600 RPM 19mm Shaft (90 LPM @ 1800 RPM) Stamped 150

Pump – 216 LPM @3600 RPM 24mm Shaft, Stamped 180

Pump – 252 LPM @3600 RPM 24mm Shaft, Stamped 210

Pump – 300 LPM @3600 RPM 32mm Shaft, Stamped 250

Pump – 360 LPM @3600 RPM 32mm Shaft, Stamped 300

Pump – 432 LPM @3600 RPM 32mm Shaft, Stamped 360

Pump – 516 LPM @3600 RPM 32mm Shaft, Stamped 430

Pump – 600 LPM @3600 RPM 32mm Shaft, Stamped 500
Line Rupture Valves and Parts
Hardware kit for 1″ Line Rupture Valve – OLS# 637482
Hardware kit for 1.25″ and 1.5″ Line Rupture Valves – OLS# 637484
Hardware kit for 2″ Line Rupture Valve – OLS# 637485
Hardware kit for 2.5″ Line Rupture Valve – OLS# 637486
Line Rupture Valve assembly 1″ – OLS# 637590
Line Rupture Valve assembly 1.25″  –  OLS# 637569
Line Rupture Valve assembly 1.5″  –  OLS# 637571
Line Rupture Valve assembly 2″  – OLS# 637572
Washer, Bonded, for adjustment Screw on LRV – OLS# 638274
Car Frame Parts
Guide (U shaped) for 601 and 701 car frames

Roller Assembly T601 and T701 Lower 80mm Concentric, 2016 to Present

Roller Assembly T601 and T701 Lower 80mm Eccentric 2005-2009 Black

Roller Assembly T601 Upper 60mm Concentric 2009-2014 Anodized

Sheave Guide, Universal (Set of two plus Hardware)

Victory Door Operators Parts
Cogged Belt OLS# 146502 Door Opening 950mm – 1150mm (37.50″ – 45.25″)
Door Operator Board OLS# 146470
Cable for operator OLS# 146468 Door Opening 950mm – 1150mm (37.50″ – 45.24″)
Coupling Device (LH Clutch) OLS# 146508
Coupling Device (RH Clutch) OLS# 146509
Door Contact bridge (points) OLS# 146466
Door Contact for landing doors OLS# 146479 (bridge OLS# 146466 not included)

Operator Door closed contacts (Dual Assembly).  OLS# 146586 Bridges OLS# 146466 not included 

 

Guide Shoe/Gib Rubbers for door panels OLS# 146492
Fire Gibs (Door Retainers) – Assembly with Hardware
Hardware Kit 2-speed door operator OLS# 127940
Hardware Kit 3-speed door operator OLS# 127941
Hardware Kit 3-speed Mechanical OLS# 127943
WECO Door Detector – 957A71 – DC24F
Double Operator Pulley at Door Closed Side (2005 to present) OLS# 146323
Operator Cogged Pulley for Motor Shaft (2005 – present) OLS# 146446
Landing and operator cable pulley OLS# 146489 (for cable between door plates) 64 mm diameter
Landing cable pulley (cable down to vertical spring) OLS# 146490 47 mm diameter
Lower Roller hold landing and car door plates to rails OLS# 146487 (48 mm diameter)
Upper Roller holds landing and car door plates to rails OLS# 146488 (56 mm diameter)
Pick-up Roller OLS# 146458 (The clips that hold the rollers in place is also available part# 636207)
Cogged Belt OLS# 146501 Door Opening 700mm – 915mm (27.50″ – 36″)
Residential Electrical

PLC, for Residential controller (Programed for Project)

Common Parts for Jacks
Elbow, Oil Drain, For Jack
Document: https://ols-na.com/wp-content/uploads/2023/12/Detail.-for-636206-635169-635152.png
Document: https://ols-na.com/wp-content/uploads/2023/12/636206-Sales-Spec-V1.0.pdf
Document:
Screw, Air Bleed, for Jack
Document: https://ols-na.com/wp-content/uploads/2023/12/635169-Sales-Spec-V1.0.pdf
Document:
Document:
Washer, Air Bleed, For Jack
Document: https://ols-na.com/wp-content/uploads/2023/12/635152-Sales-Spec-V1.0-1.pdf
Document:
Document:
Hydraulically Synchronized Telescopic Jack Parts
Gland seals – for 70/100/140 3 stage HST jack (ST 70 3S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-12.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-12.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-16.pdf
Gland seals – for 85/120/140 3 stage HST jack (ST 85 3S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-1.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-1.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-5.pdf
Internal Piston assembly – for 50/70 mm 2 stage jack Selection and Ordering Internal Synchronization Parts for OLS 2 Stage Telescopic Jacks For twin jack systems we recommend replacing the internal synchronization parts on both ja Read More
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-2.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-2.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-6.pdf
Internal Piston assembly – for 63/85 mm 2 stage jack Jack Type: OLS HST 2-Stage Jack Model: ST 63 2S Piston Diameter: 63/85 mm (2.48" – 3.35") Selection and Ordering Internal Synchonization Parts for OLS 2-St Read More
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-3.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-3.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-7.pdf
Internal piston assembly – for 70/100 mm 2 stage jack Selection and Ordering Internal Synchronization Parts for OLS 2-Stage Telescopic Jacks For twin jack systems we recommend always replacing the internal synchronization parts on Read More
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-5.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-5.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-9.pdf
Internal piston assembly – for 70/100 mm 2 stage jack Selection and Ordering Internal Synchronization Parts for OLS 2-Stage Telescopic Jacks For twin jack systems we recommend replacing the internal synchronization parts on both j Read More
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-6.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-6.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-10.pdf
Seal kit – for 50/70 mm 2 stage HST jack (ST 50 2S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-7.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-7.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-11.pdf
Seal kit – for 63/85 mm 2 stage HST jack (ST 63 2S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-8.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-8.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-12.pdf
Seal kit – for 70/100 mm 2 stage HST jack (ST 70 2S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-9.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-9.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-13.pdf
Seal kit – for 85/120 mm 2 stage HST jack (ST 85 2S)
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-2-3-Stage-Old-Design-10.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/OLS-Telescopic-Jacks-10.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/Seal-Kits-Telescopic-Jacks-14.pdf
Mechanically Synchronized Telescopic Jack Parts
Guide Block – for Mechanically Syncronised Telescopic Jack
Document:
Document:
Document:
Seal kit – for 60/75 mm 2 stage Mechanically Jack (60-2Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 60-2Y Piston Diameters: 60/75 mm (2.36"/ 2.95")
Document:
Document:
Document:
Seal kit – for 60/75/90 mm 3 stage MST Jack (60-3Y) – Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 60-3Y Piston Diameters: 60/ 75/ 90 mm (2.36"/ 2.95"/ 3.54")
Document:
Document:
Document:
Jack type: OLS MST Seal kit – for 60/80mm 2 stage OLS Jack (MT6080) Model: OLS MT6080 Piston Diameters: 60/ 80 mm (2.36"/ 3.35")
Document:
Document:
Document:
Seal Kit – for 75/90 mm 2 Stage MST Jack (75-2Y)- Repacking Tool Kit 500101 Recommended Model: 75-2Y Piston Diameters: 75/ 90 mm
Document:
Document:
Document:
Seal kit – for 75/90/105 mm 3 stage MST Jack (75-3Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EN Model: 75-3Y Piston Diameters: 75/ 90/ 105 mm (2.95"/ 3.54"/ 4.13")
Document:
Document:
Document:
Seal kit – for 90/105/120 mm 3 stage MST Jack (90-3Y)- Repacking Tool Kit 500101 Recommended Jack Type: GMV TCS/ EC Model: 90-3Y Piston Diameters: 90/ 105/ 120 mm (3.54"/ 4.13"/ 4.72")
Document:
Document:
Document:
Single Stage Jack Parts
O Ring, Joint, for 70/80mm 2 piece single stage jack
Document: https://ols-na.com/wp-content/uploads/2023/12/CYLINDER-Assembly-Instructions-for-Multiple-Piece-Single-Stage-Jack-8-2007.pdf
Document:
Document:
O-Ring, Joint, for 90mm 2 piece single stage jack, head O-ring for 80mm Jack
Document: https://ols-na.com/wp-content/uploads/2023/12/CYLINDER-Assembly-Instructions-for-Multiple-Piece-Single-Stage-Jack-8-2007-2.pdf
Document:
Document:
Seal kit for single stage 42mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-1.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-1.pdf
Document:
Seal kit for single stage 60mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-2.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-2.pdf
Document:
Seal kit for single stage 70mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-4.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-4.pdf
Document:
Seal kit for single stage 80mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-5.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-5.pdf
Document:
Seal kit for single stage 90mm jack
Document:
Document:
Document:
Seal kit for single stage 100mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-6.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-6.pdf
Document:
Seal kit for single stage 110mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-7.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-7.pdf
Document:
Seal kit for single stage 120mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-9.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-9.pdf
Document:
Seal kit for single stage 130mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-10.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-10.pdf
Document:
Seal kit for single stage 140mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-12.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-12.pdf
Document:
Seal kit for single stage 150mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-11.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-11.pdf
Document:
Seal kit for single stage 180mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-14.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-14.pdf
Document:
Seal kit for single stage 200mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-16.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-16.pdf
Document:
Seal kit for single stage 238mm jack
Document: https://ols-na.com/wp-content/uploads/2023/12/35-Replacement-of-seals-single-stage-Jacks-cod_gb05_061-18.pdf
Document: https://ols-na.com/wp-content/uploads/2023/12/pdf-detail-for-1stage-jack-seals-18.pdf
Document:
Hydraulic Power Unit (Drives) Parts
Capacitor, Motor starting ( 75 mf )
Document:
Document:
Document:
Capacitor, Motor starting ( 100 mf )
Document:
Document:
Document:
Coil, Valve ( 24 VDC ) Note: CSA Sticker 638099 Required
Document:
Document:
Document:
Coil, Valve ( 110 VAC ) Note: CSA Sticker 638095 Required
Document:
Document:
Document:
Coil, Valve ( 110 VAC/ 12 VDC) Note: CSA Sticker 638096 Required
Document:
Document:
Document:
Coil, Valve ( 220 VAC ) Note: CSA Sticker 638098 Required
Document:
Document:
Document:
Coil, Valve ( 220 VAC / 12 VDC ) Note: CSA Sticker 638097 Required
Document:
Document:
Document:
Label for 638179 (24Vdc)
Document:
Document:
Document:
Label for 638175 (110Vac)
Document:
Document:
Document:
Label for 638176 (110Vac/12Vdc)
Document:
Document:
Document:
Label for 638177 (220Vac)
Document:
Document:
Document:
Label for 638178 (220Vac/12Vdc)
Document:
Document:
Document:
Connector, For Valve Coil and Low pressure switches
Document:
Document:
Document:
Heater, for hydraulic Drive Tank
Document:
Document:
Document:
Hose T2, 1.25"
Document:
Document:
Document:
Hose T3 1.50"
Document:
Document:
Document:
Hose T4 2"
Document:
Document:
Document:
Hose Ultima 1,25"
Document:
Document:
Document:
Pressure Gauge, Axial (for MRL power units)
Document:
Document:
Document:
Pressure Gauge, Radial
Document:
Document:
Document:
Pressure Switch,Low, GMV – Bonded Washer 638275 Recomended
Document:
Document:
Document:
Pressure Switch, Low, Nason – Bonded Washer 638275 Recomended
Document:
Document:
Document:
Relay, Motor Overload, SM 110 (208-230V)
Document:
Document:
Document:
Relay, Motor Overload, SM 110 (460 V)
Document:
Document:
Document:
Thermostat for Oil Tank Heater
Document:
Document:
Document:
Ball valve 3/4"
Document:
Document:
Document:
Washer,Bonded for low pressure switch
Document:
Document:
Document:
3010 Valve 0.75"
Seal Kit for .75 inch 3010 Valve
Document:
Document:
Document:
Valve, 3010, .75 inch, 25-32 LPM, 2 coil, indirect 2:1
Document:
Document:
Document:
3010 Valve 1.25"
Seal Kit (1.25") for 1.25 inch 3010-EN Valves
Document: https://ols-na.com/wp-content/uploads/2023/12/02-Gaskets-set-for-valve-3010-1¼-1½-2-07_037.pdf
Document:
Document:
Valve, 3010, 1.25 inch 16-32 LPM 2 coil indirect 2:1
Document:
Document:
Document:
Valve, 3010, 1.25 inch 16-32 LPM 3 coil indirect 2:1
Document:
Document:
Document:
Valve, Insert, VB/S, 16-45LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 55-66LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 90LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/S, 120LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve Model: GMV 3010 EN – 1.25" Flow Range: 150 LPM (39.6 GPM)
Document:
Document:
Document:
Valve Model: GMV 3010 EN – 1.25" Flow Range: N/ A
Document:
Document:
Document:
Valve, Insert, VB/ S, 216LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMD, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMD, with emergency lowering for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VML, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMP, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMP/ S, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VP, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRF, 16-32LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRF, 90-150LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VRFP, for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 16-66LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 90-150LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 150-216LPM for 1.25 inch 3010-EN Valves
Document:
Document:
Document:
3010 Valve 1.50"
Seal Kit for 1.5 inch 3010-EN Valves  –  OLS# 638041
Document: https://ols-na.com/wp-content/uploads/2023/12/02-Gaskets-set-for-valve-3010-1¼-1½-2-07_037-1.pdf
Document:
Document:
Valve 3010-EN 1.5 inch 252-360 LPM Direct 1:1
Document:
Document:
Document:
Valve, Insert, VB/ S, 180-216 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 252 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 300 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 360 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VB/ S, 432 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMD, for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve Model: GMV 3010 EN – 1.25" Flow Range: N/ A
Document:
Document:
Document:
Valve, Block, VMD, with emergency lowering for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VML, for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMP, for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VMP/S, for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRF, 360 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRF, 432 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Block, VRFP, for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 180-216 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 250-360 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
Valve, Insert, VRP, 432 LPM for 1.5 inch 3010-EN Valves
Document:
Document:
Document:
3010 Valve 2"
Seal Kit for 2 inch 3010-EN Valve (638150)
Document: https://ols-na.com/wp-content/uploads/2023/12/02-Gaskets-set-for-valve-3010-1¼-1½-2-07_037-2.pdf
Document:
Document:
Valve, 3010-EN 2 inch 432-600 LPM indirect 1:1
Document:
Document:
Document:
Valve, Insert, VB/ S, 432LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Insert, VB/ S, 516LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Insert, VB/ S, 600LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Block, VMD, for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Block, VML, for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Block, VMP/ S, for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve Model: GMV 3010 EN – 1.25" Flow Range: N/ A
Document:
Document:
Document:
Valve, Insert, VRF, 432 to 600LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Insert, VRP, 432LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Valve, Insert, VRP, 516 to 600LPM for 2 inch 3010_EN Valve (638150)
Document:
Document:
Document:
Single Phase Submersable Motors
Motor, 2.5HP, 230V, 1PH, 19mm Shaft
Document:
Document:
Document:
Motor, 2.5HP, 230V, 1PH, 14mm Shaft
Document:
Document:
Document:
Motor, 3.5HP, 230V, 1PH, 19mm Shaft
Document:
Document:
Document:
Motor, 3.5HP, 230V, 1PH, 14mm Shaft
Document:
Document:
Document:
Three Phase Submersable Motors
Motor, 15hp, 208V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 20hp, 208V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 20hp, 230/460V 3 PH 19mm Shaft
Document:
Document:
Document:
Motor, 20hp, 230/460V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 20hp, 230/460V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 20hp, 575V 3PH 19mm Shaft
Document:
Document:
Document:
Motor, 20hp, 575V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 25hp, 208V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 25hp, 208V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 25hp, 230/460V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 25hp, 230/460V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 25hp, 575V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 25hp, 575V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 30hp, 208V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 30hp, 208V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 30hp, 230/460V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 30hp, 230/460V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 30hp, 575V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 30hp, 575V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 40hp, 208V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 40hp, 208V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 40hp, 230/460V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 40hp, 575V 3PH 24mm Shaft
Document:
Document:
Document:
Motor, 40hp, 575V 3PH 32mm Shaft
Document:
Document:
Document:
Size: 36.8 kW (50 hp) Voltage: 230/ 460 V – 3 PH – 60 Hz Shaft Diameter: 32 mm (1.25?) RPM: 3300 Power Unit (Drive) Type: OLS/ GMV Tank 3, 4
Document:
Document:
Document:
Motor, 80hp, 208V 3PH 32mm Shaft
Document:
Document:
Document:
Motor, 80hp, 575V 3PH 32mm Shaft
Document:
Document:
Document:
Pumps – Hydraulic Oil
Pump – 15 LPM @3600 RPM 14mm Shaft (7.5LPM @ 1800 RPM) Stamped 12
Document:
Document:
Document:
Pump – 19 LPM @3600 RPM 14mm Shaft (9.5 LPM @ 1800 RPM) Stamped 16
Document:
Document:
Document:
Pump – 21 LPM @3600 RPM 14mm Shaft (10.5 LPM @ 1800 RPM) Stamped 17
Document:
Document:
Document:
Pump – 24 LPM @3600 RPM 14mm Shaft (12 LPM @ 1800 RPM) Stamped 20
Document:
Document:
Document:
Pump – 30 LPM @3600 RPM 14mm Shaft (15 LPM @ 1800 RPM) Stamped 25
Document:
Document:
Document:
Pump – 30 LPM @3600 RPM 19mm Shaft (15 LPM @ 1800 RPM) Stamped 25
Document:
Document:
Document:
Pump – 42 LPM @3600 RPM 19mm Shaft (21 LPM @ 1800 RPM) Stamped 35
Document:
Document:
Document:
Pump – 52 LPM @3600 RPM 19mm Shaft (26 LPM @ 1800 RPM) Stamped 43
Document:
Document:
Document:
Pump – 66 LPM @3600 RPM 19mm Shaft (33 LPM @ 1800 RPM) Stamped 55
Document:
Document:
Document:
Pump – 90 LPM @3600 RPM 19mm Shaft (45 LPM @ 1800 RPM) Stamped 75
Document:
Document:
Document:
Pump – 120 LPM @3600 RPM 19mm Shaft (60 LPM @ 1800 RPM) Stamped 100
Document:
Document:
Document:
Pump – 150 LPM @3600 RPM 19mm Shaft (75 LPM @ 1800 RPM) Stamped 125
Document:
Document:
Document:
Pump – 180 LPM @3600 RPM 19mm Shaft (90 LPM @ 1800 RPM) Stamped 150
Document:
Document:
Document:
Pump – 216 LPM @3600 RPM 24mm Shaft, Stamped 180
Document:
Document:
Document:
Pump – 252 LPM @3600 RPM 24mm Shaft, Stamped 210
Document:
Document:
Document:
Pump – 300 LPM @3600 RPM 32mm Shaft, Stamped 250
Document:
Document:
Document:
Pump – 360 LPM @3600 RPM 32mm Shaft, Stamped 300
Document:
Document:
Document:
Pump – 432 LPM @3600 RPM 32mm Shaft, Stamped 360
Document:
Document:
Document:
Pump – 516 LPM @3600 RPM 32mm Shaft, Stamped 430
Document:
Document:
Document: